List All Products
Available as a transparent finish that prevents temperature caused discolouration of light wooden surfaces and is heat resistant to 50 degrees. Applied once, it produces a matt surface finish, and after 2 to 3 applications a semi-gloss finish. Water resistant. Certified food safe.
Refreshes the surface shine and produces a transparent, satin-glossy finish.
For interior solid timber, furniture, floors (timber and concrete), window frames and doors, as well as OSB boards and toys. Transparent, gloss, water resistant, open pored finish. Produces a protective surface film. Available in 7 colours: white, clear, mahogany, walnut, rosewood, smoked oak and dark walnut. Also suitable for kitchen cupboards and benches. Certified food safe. Click here to view the certificate.
For exterior use only. Produces a water repellent, open-pored, fast drying finish. No chipping or flaking. Surface finish is even and easy to maintain. Available in 6 colours/stains. Chestnut suitable for Merbau, Light Teak for Jarrah, Oak for lighter timbers such as Cypress, Boxtree for those looking for the closest appearance to clear, as well as those looking for something a little different Black and Slate Grey. It is a 2 coat system, can be easily rejuvenated and may be applied in foggy conditions. Extremely economical.
For soft and hard woods. For interior timber, furniture, floors, window frames and doors, as well as OSB boards. Transparent, satin finish, water repellent, open pored. Also suitable to treat concrete, can add a vindo to tint for colored concrete.
Livos do not use cement in the Bilis tile adhesive as many of the other products do. Furthermore it does not contain plastic binders, off-gassing plasticizers or other auxiliary chemicals. These chemicals, contained in other products are not blocked by any joint filling compounds or grout, which is used between the tiles.
The Bilis tile adhesive has a wide range of application and is suitable for interior ceramic tiles and small mosaics on walls and floors made of concrete, composite materials, plaster, gypsum board, breeze block or chalky sandstone. It is also suitable for heavy floor tiles however not for heavy wall tiles.
Please Note: A Normal household tile can be fastened on a wall with Bilis and after being completely dry, a maximum weight of 300g could be hanging from the tile. The maximum weight of the tile should be 250gm.
Made from renewable raw materials, it is VOC (Volatile Organic compound) free. Available in 0.05, 5 and 25kgs by special order only approx 4-6 weeks.
For interior use, for maintaining of previously waxed or oiled timber, as well as the care of Terra-Cotta tiles and linoleum. Produces a transparent, velvet gloss, moisture resistant, antistatic finish
For interior timber and metal. Satin gloss white, good coverage, elastic high yield and economical. Resistant to abrasion and scratches. Easy to apply. For coloring the white paint use any color of the vindooil paint #629
Note: the photo is of country blue color, this is a special order item.
The Canto Low Gloss Paint #692 has replaced Canto #625 these is no visable difference between the two Canto paints.
Viscous, easily spread, natural resin dispersion adhesive. After settling, produces a durable, elastic bond. Capable of full use after 3 to 5 days.
For plaster, concrete, masonry, oatmeal wall paper, gypsum board as well as absorbent sound water based painted surfaces. Solvent free. Washable, very economical, low tendency to drip or splash. Very good water vapour permeability. A longpile or lambswool roller with rounded edges and a natural bristle brush are ideal to use.
For interior surfaces such as plaster, masonry, oatmeal wallpaper, gypsum boards, clay plaster as well as absorbent, sound surfaces treated with dispersion paint. Not suitable for textile or vinyl wall coverings
A natural rust protection without lead or chromates. For interior and exterior surfaces. Also suitable for radiators and heating pipes.
For all interior surfaces like wood, walls, wall paper, tiles and other breathable wooden composite boards. Also suitable for upholstery, carpets, curtains and other fixtures. Destroys mould and their spores, as well as bacteria. Acts fast, mould-inhibiting and prevents new infestation. Readily biodegradable and non-combustible. Good skin compatibility. Economic, one application is sufficient.
Maintenance emulsion for oiled, waxed and lacquered surfaces, for floors or furniture. Also for tiles and linoleum. Cleaning, leaving a thin wax film restoring gloss.
For interior timber such as panelling and furniture after pre-treatment with LIVOS products. For regular care of linoleum. Liquid. Antistatic finish. Silky gloss. Not suitable in moist areas.
For wooden surfaces such as decks and stone surfaces such as tiles, tombstones, walls and facades. Removes chalk- and cement residue, moss, algae, stains of fungi and urine stone. Not suitable for marble, or chalk containing stone or other material sensitive to acid e.g. terrazzo.
For use in interior areas to stabilise sandy, chalky or highly absorbent surfaces. As an adhesion agent for LIVOS wall paint coatings. Not pigmented, water based sealer with deep penetrating, strong stabilisation and outstanding permeability of water vapour.
Decorative, open-pored, permeable to water vapour. Available in 15 colours. After the 3rd coat sufficiently pigmented products are also weather resistant. May also be used as a primer under the transparent ARDVOS or KUNOS.
A NO VOC oil for use on Interior floors, solid wood, e.g. parquet or floorboards. Only suitable to a limited extent for dining tables and kitchen countertops.
For heavier stains and dirt. Slightly alkaline, cleans mildly (in diluted form) and thoroughly. Also for cleaning floors before rejuvenation.
For interior usage on solid wooden furniture, especially bathroom furniture.
Primer for interior and exterior timber and stone surfaces that are highly absorbent. Open pored, deep penetrating, permanently elastic, reinforces the wood structure while it deepens the natural color of the wood grain, slow drying. Also suitable for toys and cotta tiles.
For interior wood surfaces. Contains high grade plant binding agents. Is flexible, matt easy to apply and sandable.
6 colours, each in a 0.05 lt glass container presented in a cardboard box.
Colours: include Yellow, Red, Black, Green, Blue and White.
Application Range: May be used on absorbent material such as wood, stone, unglazed clay, wood shavings, paper and cardboard, gypsum, salt dough and many other. May be diluted with water or undiluted with fingers, brush or sponge.
Ingredients: Water, mineral pigments, hep oil, methyl cellulose, extract of gentian roots. Preserved with substances permitted in the pharmaceuticals and food industries.
Technical Qualities: All colours are intermixable. Tested according to DIN EN 71 part 1. Depth of penetration and part 3. Suitable for toys.
For diluting natural oil and resin paints, and also cleaning of painting tools. Clear, colorless, with a mild odor. Low interfacial tension facilitates the penetration into the micro-capillary systems such as wood, cork, etc., and encourages the wetting of pigments and surface-active agents.
For stripping saponifiable dispersion paints, oil paints, natural and synthetic resin varnishes from various surfaces.
For cleaning of toilets, including heavily calcified toilets. Cleans dirt and odour gently.
For cleaning oiled, waxed, stained, painted or varnished surfaces such as floors and furniture. Also recommended for cleaning of linoleum, cork and stone. A mild and effective cleaner. Is biodegradable.
Pigment for tinting of all LIVOS Wall and Ceiling paints and natural texture render. Non-fading. Mixable at any ratio (creating a wider range of colour shades) with Dubron wall and ceiling paint.17 colours available.
Includes 12 colours and comes with 2 brushes and cotton face cloth.
- For children and adults
- Made from natural raw materials
- All contents are fully declared
- Made without preservatives
- Excellent coverage and skin tolerance
- Easy to apply and remove
- Holds up well to perspiration
Ingredients: Vegetable oils, beeswax, carnauba wax, mineral pigments and Vitamin E.
Colours: Ochre, Red ochre, English red, Persian red, Dark brown, Light brown, Black, Green, Dark blue, Light blue, Violet and White.
Technical Qualities: Made from natural raw materials, no preservatives, skin friendly, tested on DIN EN 71 (Suitable for toys)